Commands Listed in Alphabetical Order
SEARCH:SEARC
H<x>:TRIGger:A:DDRMemory:CSMode
This command sets or queries the chip-select mode f or DDR memory searches.
Group
Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger: A:DDRMemory:CSMode {AUTO| MANual}
SEARCH:SEARCH<x>:TRIGger: A:DDRMemory:CSMode?
Related Commands
SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:CSLevel
Arguments
AUTO mode calculates the chip-select level for you.
MANUAL lets you manually set the chip-select level.
Examples
SEARCH:SEARCH1:TRIGGER:A: DDRMEMORY:CSMODE MANUAL sets the
chip-select mode for DDR memory searche s to MANUAL.
SEARCH:SEARCH1:TRIGGER:A: DDRMEMORY:CSMODE? might return
SEARCH:SEARCH1:TRIGGER:A: DDRMEMORY:CSMODE AUTO indicating the
chip-select mode for DDR memory searches is set to AUTO.
SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:CSSource
This command
sets or queries the chip select source for DDR memory searches.
Group
Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger: A:DDRMemory:CSSource
{CH1|CH2|CH3|CH4|MATH1|MA TH2|MATH3|MATH4|REF1|REF2|REF3|REF4|NONe}
SEARCH:SEARCH<x>:TRIGger: A:DDRMemory:CSSource?
Arguments
CH<x> specifies one input channel as the search source, where <x> is the channel
number.
MATH<x> specifies the math waveform as the search source, where <x> = 1, 2, 3
or 4.
REF<x> specifies the reference waveform as the se arch source, where <x> =
1, 2, 3 or 4.
NONe specifies no CSSource.
2-434 DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual
To Next Page
Loading...
Need help?
General
