Commands Listed in Alphabetical Order
DIAg:RESults
:VERBose? (Query O nly)
This query-only command returns a more explanatory message about the results
of the l ast diagnostic (or test) execution than the DIAg:RESults? query. This
command is eq
uivalent to selecting Instrument Diagnostics from the Utilities
menu and then reviewing the Diagnostic Status.
This query-
only command can be issued while diagnostics are still in progress.
Group
Diagnostics
Syntax
DIAg:RESults:VERBose?
Related Commands
DIAg:RESults?
Examples
DIAG:RESULTS:VERBOSE? might return
:DIAG:RESULTS:VERBOSE "DIAG ABORTED, ERROR 15 in A2D-Dmux
1 inter connects"
.
DIAg:SELect:ALL (No Query Form)
This command (no query form) selects all available diagnostics. This command is
equivalent to selecting Instrument Diagnostics from the Utilities menu and then
choosing ALL from the Subsystem, Area and Test pull-down lists.
Group
Diagnostics
Syntax
DIAg:SELect:ALL ALL
Related Commands
DIAg:NAMe:AREA?, DIAg:NAMe:SUBSYS?, DIAg:NAMe:TEST ?,
DIAg:EXECUTE
Arguments
ALL selects all available diagnostics.
Examples
DIAG:SELECT:ALL ALL selects all available diagnostics.
2-172 DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual
To Next Page
Loading...
Need help?
General
