Tektronix DPO70000 Series Programmer's Manual

Commands Listed in Alphabetical Order
SEARCH:SEARC
H<x>:TRIGger:A:TIMEOut:TIMe
This command sets or queries the time setting for a timeout trigger search to
determine where to place a mark. <x> is the search number.
Group
Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger:A :TIMEOut:TIMe <NR3>
SEARCH:SEARCH<x>:TRIGger:A :TIMEOut:TIMe?
Arguments
<NR3> is the time in seconds.
Examples
SEARCH:SEARCH1:TRIGGER:A:T IMEOUT:TIME 400E-9 sets the timeout
trigger time setting for search 1 to 400 ns.
SEARCH:SEARCH1:TRIGGER:A:T IMEOUT:TIME? might return
:SEARCH:SEARCH1:TRIGGER:A: TIMEOUT:TIME 500.0000E-12, indicating
that the timeout trigger time setting for search 1 is set to 500 ns.
SEARCH:SEARCH<x>:TRIGger:A:TRANsition:DELTATime
This command sets or queries the transition time setting for a transition trigger
search to determine where to place a mark.<x> is the search number.
Group
Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger:A :TRANsition:DELTATime <NR 3>
SEARCH:SEARCH<x>:TRIGger:A :TRANsition:DELTATime?
Arguments
<NR3> specifi es the transition time, in seconds.
Examples
SEARCH:SEARCH1:TRIGGER:A:T IMEOUT:TIME 400E-9 sets the transition
trigger time setting for search 1 to 400 ns.
SEARCH:SEARCH1:TRIGGER:A:T RANSITION:DELTATIME? might return
:SEARCH:SEARCH1:TRIGGER:A: TRANSITION:DELTATIME 500. 0000E-12,
indicating that the transition trigger time setting for search 1 is set to 500 ps.
DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual 2-471

Tektronix DPO70000 Series Specifications

General

Brand	Tektronix
Model	DPO70000 Series
Category	Test Equipment
Language	English