Tektronix DPO70000 Series Programmer's Manual

Commands Listed in Alphabetical Order
Syntax
MASK:MASKPRE:
VPOS <NR3>
MASK:MASKPRE:VPOS?
Related Commands
MASK:MASKPRE:VOFFSet, MASK:MASKPRE:VSCAle
Arguments
<NR3> is a floating point number that se
ts the n ominal vertical position control
in divisions.
Examples
MASK:MASKPRE:VPOS -0.8 sets the c urrent mask n
ominal vertical position
to -0.8 divisions.
MASK:MASKPRE:VPOS? might return :MASK:MASK
PRE:VPOS 1.0000
,
indicating that the vertical position value of the displayed mask is set to 1.0
divisions.
MASK:MASKPRE:VSCAle
This command sets or returns the nominal vertical scale, in volts per division, used
to vertically scale the input channels. The query form of this command returns the
vertical scale value of the dis played mas
k. The set form of this command only
affects the current (displayed) mask.
Group
Mask
Syntax
MASK:MASKPRE:VSCAle <NR3>
MASK:MASKPRE:VSCAle?
Related Commands
MASK:MASKPRE:VOFFSet, MASK:MASKPRE:VPOS
Arguments
<NR3> is a floating point number that sets the nominal bit width in seconds.
Examples
MASK:MASKPRE:VSCALE 200E-3 sets the current mask nominal vertical scale
to 200 millivolts per division.
MASK:MASKPRE:VSCALE? might return :MASK:MASKPRE :VSCALE
400.0000E-3
, indicating that the vertical position value of the displayed mask is
set to 400 millivolts per division.
DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual 2-313

Tektronix DPO70000 Series Specifications

General

Brand	Tektronix
Model	DPO70000 Series
Category	Test Equipment
Language	English