Tektronix DPO70000 Series Programmer's Manual

Commands Listed in Alphabetical Order
Group
Histogram
Syntax
HIStogram:DISplay {OFF|LOG|LINEAr}
HIStogram:DISplay?
Related Commands
HIStogram:MODe, HIStogram:STATE
Arguments
<OFF> disables the histogram display but allows histogram data to accumulate.
This argument provides for backward compatibility with older DPO Series
instruments; it does not affect a change in the display scaling of the histogram.
When queried, HIStogram:DISplay? will return
OFF if the histogram state or mode
has been disabled using the HIStogram:MODe or HIStogram:STATE commands.
<LOG> sets the histogram display to logarithmic scaling.
<LINEAr> sets the histogram display to linear scaling. This is the default setting.
Examples
HISTOGRAM:DISPLAY LOG sets the h istogram scaling to be the log count of
each histogram bin.
HISTOGRAM:DISPLAY? might return :HISTOGRAM:DISPLAY LOG indicating
that the current histogram display scaling i s the log count of each histogra
mbin.
HIStogram:FUNCtion
This command either selects the type of histogram to create or returns the current
histogram type. This command is equivalent to selecting Waveform Histogram
from the Measure menu and then choosing either Horizontal or Vertical from the
Histogram Mode group box.
Group
Histogram
Syntax
HIStogram:FUNCtion {HORizonta
l|VERTical}
HIStogram:FUNCtion?
Related Commands
HIStogram:MODe, HIStogram:STATE
Arguments
HORizontal displays a horizontally positioned histogram that shows time
distribution.
VERTical displays a vertically positioned histogram that shows a voltage
distribution (or another distribution such as amperes).
DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual 2-235

Tektronix DPO70000 Series Specifications

General

Brand	Tektronix
Model	DPO70000 Series
Category	Test Equipment
Language	English