Tektronix DPO70000 Series Programmer's Manual

Commands Listed in Alphabetical Order
MEASUrement:
IMMed:DELay? (Query Only)
This query-only command returns information about the immediate delay
measurement. This c ommand is equivalent to selecting Measurement Setup from
the Measure m
enu, choosing the Time tab and then clicking the Delay button.
Group
Measurement
Syntax
MEASUrement:IMMed:DELay?
Examples
MEASUREMENT:IMMED:DELAY? might return
:MEASUREMENT:IMMED:DELAY: EDGE1 RISE;EDGE2 RISE; DIRECTION
FORWARDS
.
MEASUrement:IMMed:DELay:DIREction
This command sets or returns the starting point and direction that determines
the delay “to” edge when taking an immediate d elay measurement. Use the
MEASUrement:IMMed:SOUrce<x> command to specify the delay “to”
waveform. This command is equivalent to selecting Measurement Setup from the
Measure menu, choosing the Time tab, clicking the D elay button to display the
delay settings and then clicking the desired Search Direction setting.
Group
Measurement
Syntax
MEASUrement:IMMed:DELay:D IREction {BACKWards|FORWa rds}
MEASUrement:IMMed:DELay:D IREction?
Related Commands
MEASUrement:IMMed:SOUrce<x>
Arguments
BACKWards starts the
search at the end of the waveform and looks for the last
rising or falling edge in the waveform.
FORWards starts the s
earch at the beginning of the waveform and looks for the
first rising or falling edge in the waveform.
Examples
MEASUREMENT:IMMED:DELAY:D IRECTION FORWARDS starts searching from the
beginning of the waveform record and looks for the first rising or falling edge.
MEASUREMENT:IMMED:DELAY:D IRECTION? might return
:MEASUREMENT:IMMED:DELAY: DIRECTION BACKWARDS, indicating
2-368 DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual

Tektronix DPO70000 Series Specifications

General

Brand	Tektronix
Model	DPO70000 Series
Category	Test Equipment
Language	English