Tektronix DPO70000 Series Programmer's Manual

Commands Listed in Alphabetical Order
*TRG (No Query
Form)
This command (no query form) performs the group execute trigger on commands
definedby*DDT.
Group
Miscellaneous
Syntax
*TRG
Related Commands
*DDT
Examples
*TRG immediately executes all commands that have been definedby*DDT.
TRIGger
This command forces a trigger event to occur. The query returns the current
trigger parameters for the instrument.
Group
Trigger
Syntax
TRIGger FORCe
TRIGger?
Arguments
FORCe creates a trigger event. If TRIGger:STATE is set to READy, the acquisition
will complete. Otherwise, this command will be ignored. This is equivalent to
selecting A Event (Main) Trigger Setup from the Trig menu and then clicking
Force Trigger.
Examples
TRIGGER FORCE forces a trigger event to occur.
TRIGGER? might return these trigger parameters: :TRIGGE R:A:MODE
AUTO;TYPE EDGE;LEVEL 0 .0000;HOLDOFF:B Y DEFAULT;TIME
1.5000E-6;:TRIGGER:A:EDGE :SOURCE CH1;COUPLING
DC;SLOPE RISE;:TRIGGER:A:LOGIC:CLASS PATTERN;FUNCTION
AND;THRESHOLD:CH1 1.2000;CH2 1.2000;CH3 1.2000;CH4
1.2000;:TRIGGER:A:LOGIC:I NPUT:CH1 HIGH;CH2
X;CH3 X ;:TRIGGER:A:LOG IC:PATTERN:INPUT:CH4
X;:TRIGGER:A:LOGIC:PATTER N:WHEN
TRUE;WHEN:LESSLIMIT 5.0000E-9;MOREL IMIT
5.0000E-9;:TRIGGER:A:LOGI C:SETHOLD:CLOCK:EDGE RISE ;THRESHOLD
1.2000;SOURCE CH2;:TRIGGER:A:LOGIC:SETHOL D:DATA:THRESHOL D
2-496 DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual

Tektronix DPO70000 Series Specifications

General

Brand	Tektronix
Model	DPO70000 Series
Category	Test Equipment
Language	English