Tektronix DPO70000 Series Programmer's Manual

Commands Listed in Alphabetical Order
This command is
equivalent to selecting Save As from the File menu, clicking
the Waveform button, and choosing the desired waveform file format from the
Save as type drop-down list.
Group
Save and Recall
Syntax
SAVe:WAVEform:FILEFormat
{INTERNal|MATHCad|MATLab| SPREADSHEETCsv|
SPREADSHEETTxt|TIMEStamp}
SAVe:WAVEform:FILEFormat?
Related Commands
CURVe, DATa, DATa:STARt, DATa:STOP, SAVe:WAVEform,
WFMInpre:NR_Pt, WFMOutpre:NR_Pt?
Arguments
INTERNal specifiesthatwaveformsaresavedinaninternalformat,usinga.wfm
filename extension. These files can be recalled as reference waveforms. When this
argument is specified, the settings specified via the DATa:STARt and DATa:STOP
commands have no meaning a s the entire waveform is saved.
MATHCad spe cifies that waveforms are saved in MathCad format, using a .dat
filename extension. When saving in this format, waveform values are delimited
with new lines. MathCad format enables easy import of waveform data into
MathCad or MATLAB. For FastAcq waveforms, data is imported as a m atrix. For
these formats, waveform header and timing information is saved in a separate
header fi le. MathCad format header files use a _hdr.dat extension.
MATLab specifi es that waveforms are saved in Matlab format, using a .dat filename
extension. When saving in this format, waveform values are d elimited with new
lines. MATLAB format enables easy import of waveform data into MathCad
or MATLAB. For FastAcq waveforms, data is imported as a matrix. For these
formats, waveform header and timing information is saved in a separate header
file. MATLAB format header files use a _hdr.dat extension.
SPREADSHEETCsv specifies that waveform data is saved in a format that contains
comma delimited v alues. These waveform data files are named using the .csv
filename extension. Saving waveforms in CSV format enables spreadsheet
programs to import the data.
SPREADSHEETTxt specifies that waveform data is saved in a format that contains
tab delimited values. These waveform data files are named using the .txt filename
extension. Saving waveforms in this format enables spreadsheet programs to
import the data.
TIMEStamp specifies that timestamp data is saved in a format that contains comma
delimited values. These data files are named using the .txt filenam
e extension.
Saving waveforms in this format enables spreadsheet programs to import the data.
2-428 DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual

Tektronix DPO70000 Series Specifications

General

Brand	Tektronix
Model	DPO70000 Series
Category	Test Equipment
Language	English