Tektronix MSO56 User Manual

Command groups
Table 2-37: Search and Mark commands (cont.)
Command
Description
SEARCH:SEARCH<x>:TRIGger:A:BUS:USB :
DATa:TYPe
Sets or queries the data packet type for the specified USB bus trigger search to
determine where to place a mark.
SEARCH:SEARCH<x>:TRIGger:A:BUS:USB :
DATa:VALue
Sets or queries the data value for data token for the specifi ed bus trigger search to
determine where to place a mark.
SEARCH:SEARCH<x>:TRIGger:A:BUS:USB :
ENDPoint:VALue
Sets or queries the endpoint value for normal token for the specified USB bus
trigger search to determine where to place a mark.
SEARCH:SEARCH<x>:TRIGger:A:BUS:USB :
ERRTYPE
Sets or queries the error type for the specified USB bus trigger search to determine
wheretoplaceamark.
SEARCH:SEARCH<x>:TRIGger:A:BUS:USB :
HANDSHAKEType
Sets or queries the handshake type for the specifi ed USB bus trigger search to
determine where to place a mark.
SEARCH:SEARCH<x>:TRIGger:A:BUS:USB :
SOFFRAME NU M ber
Sets or queries the frame number string to use for the Start of Frame for the
specified USB bus trigger search to determine where to place a mark.
SEARCH:SEARCH<x>:TRIGger:A:BUS:USB :
SPECIALType
Sets or queries the PID value for the USB bus trigger search to determine where to
place a mark.
SEARCH:SEARCH<x>:TRIGger:A:BUS:USB :
SPLIT:ET:VALue
Sets or queries the Endpoint Type value for the specified USB bus trigger split
token fi eld search to determine where to place a mark.
SEARCH:SEARCH<x>:TRIGger:A:BUS:USB :
SPLIT:HUB:VALue
Sets or queries the hub address of the specified USB bus trigger on split token field
search to determine where to place a mark.
SEARCH:SEARCH<x>:TRIGger:A:BUS:USB :
SPLIT:PORT:VALue
Sets or queries the port address for the specified USB bus trigger on split token field
search to determine where to place a mark.
SEARCH:SEARCH<x>:TRIGger:A:BUS:USB :
SPLIT:SC:VA Lue
Sets or queries the Start/Complete value for the specifi ed USB bus trigger on split
token fi eld search to determine where to place a mark.
SEARCH:SEARCH<x>:TRIGger:A:BUS:USB :
SPLIT:SE:VALue
Sets or queries the Start/End value for the specified USB bus trigger on split token
field search to determine where to place a mark.
SEARCH:SEARCH<x>:TRIGger:A:BUS:USB :
TOKENType
Sets or queries the token type when the specified USB bus trigger search to
determine where to place a mark.
SEARCH:SEARCH<x>:TRIGger:A:EDGE:
SLOpe
Sets or queries the slope for an edge trigger search to determine where to place
amark.
SEARCH:SEARCH<x>:TRIGger:A:EDGE:
SOUrce
Sets or queries the source waveform for an edge trigger search to determine
wheretoplaceamark.
SEARCH:SEARCH<x>:TRIGger:A:LOGIc:
FUNCtion
Sets or queries the logic operator for a pattern or state trigger search to determine
wheretoplaceamark.
SEARCH:SEARCH<x>:TRIGger:A:LOGIc:
USEClockedge
Sets whether or not Logic search uses a clock source.
SEARCH:SEARCH<x>:TRIGger:A:RUNT:
WHEn
Sets or queries the condition setting for a runt trigger search to determine where to
place a mark.
SEARCH:SEARCH<x>:TRIGger:A:RUNT:
WIDth
Sets or queries the width s etting for a runt trigger search to determine where to
place a mark.
SEARCH:SEARCH<x>:TRIGger:A:SETHold:
CLOCk:EDGE
Sets or queries the clock slope setting for a setup/hold trigger search to determine
wheretoplaceamark.
SEARCH:SEARCH<x>:TRIGger:A:SETHold:
CLOCk:SOUrce
Sets or queries the clock source setting for a setup/hold trigger search to determine
wheretoplaceamark.
2-70 MSO54, MSO56, MSO58, MSO58LP Programmer

Tektronix MSO56 Specifications

General

Brand	Tektronix
Model	MSO56
Category	Test Equipment
Language	English