X35 Monitor Air Seeder Setup
6.76
2. Scales column - this will show how many
scale channels are being used on each scale
link ECU.
a. For the 7000 Series this will be set to 2.
b. For the 9000 Series this will be set to 4
for the 1st scale link ECU. It will be set
to 1 for the optional saddle tank scale link
ECU.
3.
Remove
column - this can be used to remove
a scale link ECU from the list to detect a
replacement or if the scale link ECU’s need to
be re-ordered.
Note
If the correct factory profile is selected then all the
weigh scale setup should be complete once the
scale link ECU’s are detected.
To Next Page
Loading...
