X35 Console Monitoring & Managing Files
10.7
10.2 Alarm Window
2. If there are multiple alarms present, they will
all show in a list below the current alarm.
The top current alarm will cycle through the
list of alarms.
a. New alarms that are triggered will briefly
show up with bold text, to designate new
alarms in the list.
b. To view specific alarms from the list
below, press on the list and drag up to
cycle through alarms.
c. If there are any higher priority alarms
triggered, they will automatically be shown
as the top current alarm until they are
addressed.
Figure 10.10 - Alarm Windows
Press to Clear
Alarm
Press to go to
Alarm Setting
Press to
silence alarm
This alarm window will appear anytime there is an
alarm triggered. Refer to Section 4.5 - Alarms for
specific alarm settings.
These alarms need to be reviewed when they
appear, to determine if the issue needs to be
addressed immediately or if it is just an alert that
can be cleared and operation can continue.
1. The top bar will show the current alarm.
a. The current alarm can be cleared by
pressing on the middle section of the alarm
bar.
b. You can go directly to the setting for
the respective alarm, by pressing on the
Wrench Icon on the left.
c. The alarm can be silenced by pressing on
the Speaker Icon on the right.
d. If certain alarms have more detail available
there will text in the top right corner of
the alarm bar to drag for more detail. You
can drag here to expand and view the
additional explanation.
Press & drag here to view/
hide detail
Press & drag up
to view next alarm in list
To Next Page
Loading...
Need help?
General
