Topcon X35 - 5 Vehicle

X35 Console Vehicle Setup
5.1
5 Vehicle
This section explains how to set up and access the profile information about the vehicle on which the
X35 console is mounted. If the console is to be used on more than one vehicle, then more than one
vehicle profile will need to be set.
Note
The X35 console is intended for a multitude of applications. Equipment set-up involves " vehicles" and
"implements" which then allow the user to move X35 console between machines to maximize its value.
In a seeding application:
Vehicle refers to a tractor that is used to pull the seeding implement.
Implement refers to a seeding drill and the air seeder that are set in a single combined implement.
5 Vehicle .............................................................................................................................................5.1
5.1
Vehicle Menu ............................................................................................................................5.2
5.2 Selecting an Existing Vehicle ....................................................................................................5.2
5.3 Setting Up a New Vehicle .........................................................................................................5.3
5.4 Setting Up Vehicle Geometry ....................................................................................................5.7
5.5 Steering ....................................................................................................................................5.8
5.6 Antenna ....................................................................................................................................5.8