Topcon X35 - Timing

X35 Monitor Air Seeder Setup
6.37
6.6.2 Timing
This will set the times for product to get from the
section control valves to the openers.
1. The first tab will allow you to set if each
boom will have custom settings or you can
copy settings from a specified boom.
Important
Accurate times are critical to the proper function
of the ASC system. Measure carefully!
When measuring times, make sure that:
- the fan speed is set to the speed that will be
used during seeding,
- you start timing when the section control valve
opens/closes
- confirm timing in the field for all boom sections.
Figure 6.50 - Section Control - Timing Settings