X35 ConsoleProduct Setup
7.8
5. Refer to Figure 7.10. Enter the product rate
increment and the product rate preset 1 & 2.
a. Rate
Increment - is used during operation
to increase/decrease the requested rate by a
preset value.
b. Pr
oduct Rate Preset 1 & 2 - are preset
rates, that are used to immediately adjust
the application rate to that value during
operation.
c. Select the Product Increment button.
i. Use the numeric keypad to enter the
required value and confirm.
d. Repeat for Rate Preset 1 and Rate Preset 2.
6. Product setup is now complete and the next
screen will prompt you to save the product
settings or cancel it, refer to Figure 7.11.
Figure 7.10 - Entering Rate Increment, and Rate Preset 1 & 2
Figure 7.11 - Product Setup Complete
To Next Page
Loading...
