Chapter 9 VLAN
OLT2406 User’s Guide
112
Figure 69 Advanced Application > VLAN > VLAN Status > VLAN Port Setting
The following table describes the labels in this screen.
Table 25 Advanced Application > VLAN > VLAN Status> VLAN Port Setting
LABEL DESCRIPTION
GVRP GVRP (GARP VLAN Registration Protocol) is a registration protocol that defines a way to
register necessary VLAN members on ports across the network.
Select this check box to permit VLAN groups beyond the local OLT.
Port This field displays the port number.
The first 4-8 ports maps with the physical PON ports of OLT1404A and 14048A, and the rest
maps with the other physical ports on the OLT’s front panel.
See Table 29 on page 120 for more detailed information.
* Settings in this row apply to all ports.
Use this row only if you want to make some settings the same for all ports. Use this row first to set
the common settings and then make adjustments on a port-by-port basis.
Note: Changes in this row are copied to all the ports as soon as you make them.
Ingress Check If this check box is selected, the OLT discards incoming frames on a port for VLANs that do not
include this port in its member set.
Clear this check box to disable ingress filtering.
To Next Page
Loading...
