ZyXEL Communications OLT2406 - Uniport Queue

Chapter 38 ONT Template
OLT2406 User’s Guide
306
38.2.2 Uniport Queue
Use this screen to configure QoS queues for the UNI (User Network Interface) ports. Click Uniport Queue
in the Advanced Application > ONT Template screen to display the screen as shown.
Figure 186 Advanced Application > ONT Template > Uniport Queue
Ustype This displays the upstream bandwidth group type the profile uses.
The upstream bandwidth group type is selected automatically by the OLT after you select a
bandwidth profile for the ONT’s upstream traffic in the US BW Profile field.
US BW Profile Select the bandwidth profile to apply to the ONT’s upstream traffic.
Click Bandwidth Profile Setting to display the settings of the bandwidth profiles.
DS BW Profile Select the bandwidth profile to apply to the ONT’s downstream traffic.
Click Bandwidth Profile Setting to display the settings of the bandwidth profiles.
Add Click Add to add an ONT Bwgroup entry.
Cancel Click Cancel to clear the fields.
Clear Click Clear to return the screen’s settings to the defaults.
Index This is the index number of an ONT bandwidth group.
AID This is the ONT’s ID in the format: ont-<pon>-<ont>.
ID This displays the bandwidth group ID number.
USType This displays the upstream bandwidth group type the ONT bandwidth group uses.
US BW Profile This displays the bandwidth profile the ONT bandwidth group applies to the ONT’s upstream
traffic.
DS BW Profile This displays the bandwidth profile the ONT bandwidth group applies to the ONT’s downstream
traffic.
Delete Select this for one or more profiles and click Delete to remove them.
* Use this row to select all of the profiles for deletion.
Delete Click Delete to remove the profiles with the Delete option selected.
Cancel Click Cancel to begin configuring the screen again.
Table 132 Advanced Application > ONT Template > ONT Bwgroup
LABEL DESCRIPTION