Chapter 67 Port Mirroring
OLT2406 User’s Guide
488
67.3 Port Mirroring Command Examples
This example enables port mirroring and copies outgoing traffic from ge port 4 on the card in slot 6 to
uplink port 3 on the MSC. Use “msc-1-<port>” for an uplink port (“msc-1-” applies to the active MSC no
matter which slot it is in).
This example displays the mirror settings of the OLT after you configured in the example above.
OLT2406(config)# mirror-port
OLT2406(config)# mirror-port msc-1-3
OLT2406(config)# interface port-channel ge-6-4
OLT2406(config-interface)# mirror
OLT2406(config-interface)# mirror dir egress
OLT2406# show mirror
Mirroring: enable
Monitor port: msc-1-3
Mirrored port: ge-6-4
Ingress:
Egress: ge-6-4
Both:
To Next Page
Loading...
