EasyManua.ls Logo

ZyXEL Communications OLT2406 - Error Logs Troubleshooting

ZyXEL Communications OLT2406
766 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 109 Troubleshooting
OLT2406 User’s Guide
730
After you have resolved the issues on the rogue ONT, you can use the no O7-state <ont-serial-
number> command to have the OLT reaccept the ONT’s traffic.
109.2 Error Logs Troubleshooting
Use show logging to display all logs. For example:
This table describes the format of a log message.
This table lists the log severity levels from high to low.
OLT2406(config)# interface olt pon-5-1
OLT2406(config-rogue)# no O7-state 414C434C00050017
OLT2406# sh logging
1 Mar 20 12:59:19 IN authentication: User admin login
2 Mar 20 12:23:06 IN authentication: User admin login
3 Mar 20 12:19:09 IN system: [poncard-5 ] Restore config ready
4 Mar 20 12:19:07 DE interface: Port ge-5-4 link up
5 Mar 20 12:19:07 DE interface: Port ge-5-3 link up
6 Mar 20 12:19:07 DE interface: Port ge-5-2 link up
7 Mar 20 12:19:06 DE interface: Port ge-5-4 link down
8 Mar 20 12:19:06 DE interface: Port ge-5-3 link down
9 Mar 20 12:19:06 DE interface: Port ge-5-2 link down
10 Mar 20 12:19:06 IN system: [poncard-5 ] Ready to restore cfg
11 Mar 20 12:19:05 IN system: [poncard-5 ] pon bind success.
12 Mar 20 12:19:02 IN system: [poncard-5 ] Downloading...
13 Mar 20 12:19:02 IN system: [linecard-5 ] Detected
14 Mar 20 12:18:26 DE interface: Port ge-5-4 link up
15 Mar 20 12:18:26 DE interface: Port ge-5-3 link up
16 Mar 20 12:18:26 DE interface: Port ge-5-2 link up
17 Mar 20 12:18:26 DE interface: Port ge-5-4 link down
18 Mar 20 12:18:26 DE interface: Port ge-5-3 link down
19 Mar 20 12:18:26 DE interface: Port ge-5-2 link down
Table 382 A Log Message Format
INDEX DATE AND TIME SEVERITY CATEGORY MESSAGE CONTENT
2 Sep 25 10:46:49 CR system: System voltage has recovered to normal state
Table 383 Log Severity Levels
CODE SEVERITY
0 EM: Emergency, the system is unusable.
1 AL: Alert, action must be taken immediately.
2 CR: Critical, the system condition is critical.
3 ER: Error, there is an error condition on the system.
4 WA: Warning, there is a warning condition on the system.
5 NO: Notice, there is a normal but significant condition on the system.

Table of Contents

Related product manuals