ZyXEL Communications OLT2406 - Voip Configuration Supported on the PMG5318; Voip Show Commands

Chapter 78 VoIP
OLT2406 User’s Guide
571
78.6 VoIP Show Commands
The following table lists the commands for displaying VoIP settings and status.
78.7 VoIP Configuration Supported on the PMG5318
The following table lists the VoIP configuration the PMG5318 can support.
Table 298 VoIP Show Commands
COMMAND DESCRIPTION M P
show voip-common-profile
Displays the settings of the VoIP common
profiles.
E13
show voip-dial-plan
Displays the settings of the VoIP dial plan profiles. E 13
show voip-sip-profile
Displays the settings of the VoIP SIP profiles. E 13
show remote uniport uniport-<aid>
vlan
Displays the specified remote ONT UNI port’s
VLAN status.
aid: uniport-<slot>-<pon>-<ont>-<card>-
<port>
E13
show remote uniport <aid> voip
Displays the specified remote ONT UNI port’s
VoIP status.
aid: uniport-<slot>-<pon>-<ont>-<card>-
<port>
E13
Table 299 VoIP Configuration Supported on the PMG5318
COMMAND DESCRIPTION M P
voip-common-profile <name>
Creates the specified profile of common VoIP
settings (1 to 15 character name) and enters the
sub-command mode for configuring it. You do
not actually configure any common VoIP
settings for the PMG5318 though. You just need
a VoIP common profile name to specify when
you configure VoIP service settings for the
PMG5318 subscriber port.
C13
voip-sip-profile <name>
Creates the specified profile of VoIP SIP settings
(1 to 15 character name) and enters the sub-
command mode for configuring it.
C13
registrar <1~63 characters>
Configures the IP address or URI (from 1 to 63
characters) of a registrar server.
C13
voip-dial-plan <name>
Creates the VoIP dial plan profile (1 to 15
character name) and enters the sub-command
mode for configuring it.
C13