Chapter 9 VLAN
OLT2406 User’s Guide
117
The following table describes the labels in this screen.
9.4 Configure a Static VLAN
Use this screen to configure a static VLAN for the OLT. Click the Static VLAN link in the VLAN Status screen
to display the screen as shown next.
Table 27 Advanced Application > VLAN > VLAN Port Setting > Protocol Based Vlan
LABEL DESCRIPTION
Active Select this check box to activate this protocol based VLAN.
Port Type a port number to be included in this protocol based VLAN.
This port must belong to a static VLAN in order to participate in a protocol based VLAN. See
Chapter 9 on page 107 for more details on setting up VLANs.
See Table 29 on page 120 for more detailed information.
Name Enter up to 32 alphanumeric characters to identify this protocol based VLAN.
Ethernet-type Use the drop down list box to select a predefined protocol to be included in this protocol based
VLAN or select Others and type the protocol number in hexadecimal notation. For example, the
IP protocol in hexadecimal notation is 0800, and Novell IPX protocol is 8137.
Note: Protocols in the hexadecimal number range of 0x0000 to 0x05ff are not allowed
to be used for protocol based VLANs.
VID Enter the ID of a VLAN to which the port belongs. This must be an existing VLAN which you
defined in the Advanced Application > VLAN > Static VLAN screen.
Priority Select the priority level that the OLT will assign to frames belonging to this VLAN.
Add Click this to create a new entry or to update an existing one.
This saves your changes to the OLT’s run-time memory. The OLT loses these changes if it is turned
off or loses power, so use the Save link on the top navigation panel to save your changes to the
non-volatile memory when you are done configuring.
Cancel Click Cancel to begin configuring this screen afresh.
Index This is the index number identifying this protocol based VLAN. Click on any of these numbers to
edit an existing protocol based VLAN.
Active This field shows whether the protocol based VLAN is active or not.
Port This field shows which port belongs to this protocol based VLAN.
Name This field shows the name the protocol based VLAN.
Ethernet-type This field shows which Ethernet protocol is part of this protocol based VLAN.
VID This field shows the VLAN ID of the port.
Priority This field shows the priority which is assigned to frames belonging to this protocol based VLAN.
Delete Click this to delete the protocol based VLANs which you marked for deletion.
Cancel Click Cancel to clear the check boxes.
To Next Page
Loading...
