Chapter 31 ONT VoIP
OLT2406 User’s Guide
278
31.3 ONT VoIP Dial Plan Profile
The system uses dial plans to identify specific types of phone numbers dialed by a user, and to process
the number before transmission by deleting or adding digits according to the relevant rule. The dial plan
can also forward the call to a specific SIP server. Use a dial plan profile to collect a group of dial plans
into a profile. Then assign the dial plan profile to a port to apply all of the dial plans included in the
profile.
Use this screen to configure dial plan profiles. Click Voip-Dial-Plan in the Advanced Application > ONT
VoIP screen to display the screen as shown.
conference
factory uri
Configure the conference factory URI (from 1 to 63 characters). A conference factory generates a
unique conference ID, to identify and address a conference focus, using a call signaling interface.
Apply Click Apply to save the changes.
Cancel Click Cancel to clear the fields.
Clear Click Clear to return the screen’s settings to the defaults.
Index This is the index number of an ONT SIP VoIP profile.
Name This is the name of the profile.
Rule This displays the profile’s settings.
Delete Select this for one or more profiles and click Apply to remove them.
* Use this row to select all of the profiles for deletion.
Delete Click Delete to remove the profiles with the Delete option selected.
Cancel Click Cancel to begin configuring the screen again.
Table 114 Advanced Application > ONT VoIP > Voip-Sip-Profile (continued)
LABEL DESCRIPTION
To Next Page
Loading...
