ZyXEL Communications OLT2406 - Chapter 36 Qos Profile; ONT Qos; ONT Qos Ingress Profile; Qos Profile

OLT2406 User’s Guide
290
CHAPTER 36
QoS Profile
36.1 ONT QoS
Use the ONT QoS screens to configure Quality of Service settings for the ONT devices.
36.1.1 What You Can Do
• Use the Ingress Profile screen (Section 36.2 on page 290) to configure ONT QoS ingress profiles to map
IEEE 802.1p priority tags to traffic classes.
• Use the Bw-Profile screen (Section 36.3 on page 291) to configure ONT QoS upstream and
downstream bandwidth profiles.
• Use the Pbit-Profile screen (Section 36.4 on page 292) to configure ONT QoS profiles that translate IEEE
802.1p priority bit values to other values.
• Use the Cac-Profile screen (Section 36.5 on page 293) to configure ONT QoS CAC profiles to apply
multicast bandwidth rate limits.
36.2 ONT QoS Ingress Profile
Use this screen to configure ONT QoS ingress profiles to map IEEE 802.1p priority tags to traffic classes.
Click Advanced Application > QoS Profile in the navigation panel to display the screen as shown.
Figure 175 Advanced Application > QoS Profile > Ingress Profile