Chapter 31 ONT VoIP
OLT2406 User’s Guide
275
31.2 ONT VoIP SIP Profile
Use this screen to configure profiles of ONT VoIP SIP settings. Click Voip-Sip-Profile in the Advanced
Application > ONT VoIP screen to display the screen as shown.
oob dtmf Turn out-of-band DTMF carriage on or off.
signal code Set the signaling code:
loo-str: Loop start
gro-str: Ground start
loo-rev: Loop reverse battery
coi-fir: Coin first
dia-ton: Dial tone first
mul-par: Multi-party
Apply Click Apply to save the changes.
Cancel Click Cancel to clear the fields.
Clear Click Clear to return the screen’s settings to the defaults.
Index This is the index number of an ONT common VoIP profile.
Name This is the name of the profile.
Rule This displays the profile’s settings.
Delete Select this for one or more profiles and click Delete to remove them.
Select Select this to edit the profile in the fields above.
* Use this row to select all of the profiles for deletion.
Delete Click Delete to remove the profiles with the Delete option selected.
Cancel Click Cancel to begin configuring the screen again.
Table 113 Advanced Application > ONT VoIP > VoIP Common Profile (continued)
LABEL DESCRIPTION
To Next Page
Loading...
