ZyXEL Communications OLT2406 - FTP Restrictions; GUI-Based FTP Clients

Chapter 43 Maintenance
OLT2406 User’s Guide
353
43.9.4 GUI-based FTP Clients
The following table describes some of the commands that you may see in GUI-based FTP clients.
43.9.5 FTP Restrictions
FTP will not work when:
• FTP service is disabled in the Service Access Control screen.
• The IP address(es) in the Remote Management screen does not match the client IP address. If it does
not match, the OLT will disconnect the FTP session immediately.
General Commands for GUI-based FTP Clients
COMMAND DESCRIPTION
Host Address Enter the address of the host server.
Login Type Anonymous.
This is when a user I.D. and password is automatically supplied to the server for
anonymous access. Anonymous logins will work only if your ISP or service administrator
has enabled this option.
Normal.
The server requires a unique User ID and Password to login.
Transfer Type Transfer files in either ASCII (plain text format) or in binary mode. Configuration and
firmware files should be transferred in binary mode.
Initial Remote Directory Specify the default remote directory (path).
Initial Local Directory Specify the default local directory (path).