ZyXEL Communications OLT2406 - Chapter 38 ONT Template; ONT Template; ONT Template Overview; The ONT Template Screen

Chapter 38 ONT Template
OLT2406 User’s Guide
302
CHAPTER 38
ONT Template
38.1 ONT Template Overview
Configure ONT templates to manage ONT settings. After you create ONT templates, see Chapter 39 on
page 319 to create ONT configurations to apply them.
An ONT template defines the general settings for an ONT, such as DHCP option 82 information, the port
speed, and performance monitoring.
38.1.1 What You Can Do
• Use the ONT Template screen (Section 38.2 on page 302) to configure templates’ settings.
• Use the ONT Bwgroup screen (Section 38.2.1 on page 305) to configure bandwidth group settings for
ONTs.
• Use the Uniport Queue screen (Section 38.2.2 on page 306) to configure QoS queues for the UNI (User
Network Interface) ports.
• Use the Uniport VLAN screen (Section 38.2.3 on page 308) to configure UNI port VLAN flow settings.
• Use the Uniport Multicast screen (Section 38.2.4 on page 310) to configure UNI port multicast
subscriber channels.
• Use the Uniport VoIP screen (Section 38.2.5 on page 312) to configure UNI port VoIP settings.
• Use the ACL ONT screen (Section 38.2.6 on page 313) to assign an identification number to an ACL
profile, and apply an ACL profile to an ONT.
• Use the ACL Profile Setting screen (Section 38.2.6.1 on page 314) to create an ACL profile for an ONT.
• Use the ONT ACL Profile Counter screen (Section 38.2.6.2 on page 317) to display the dropped
packets counters of the selected ACL profile(s) and ONT(s).
38.2 The ONT Template Screen
Use this screen to edit or modify the ONT template configurations. A PON port can have up to 8
templates. Click Advanced Application > ONT Template in the navigation panel to display the screen as
shown.