Chapter 42 DHCP
OLT2406 User’s Guide
338
42.4 Configuring DHCP VLAN Settings
Use this screen to configure your DHCP settings based on the VLAN domain of the DHCP clients. Click IP
Application > DHCP in the navigation panel, then click the VLAN link In the DHCP Status screen that
displays.
See Section 27.10.1.4 on page 243 for more information about the configuration order for DHCP option
82 settings in different screens.
Note: You must set up a management IP address for each VLAN that you want to configure
DHCP settings for on the OLT. See Section 5.2 on page 74 for information on how to do
this.
Figure 208 IP Application > DHCP > VLAN
The following table describes the labels in this screen.
Table 158 IP Application > DHCP > VLAN
LABEL DESCRIPTION
VID Enter the ID number of the VLAN to which these DHCP settings apply.
DHCP Status Select Server to have the OLT act as a DHCP server.
Select Relay to have the OLT forward DHCP requests to the DHCP server.
To Next Page
Loading...
