ZyXEL Communications OLT2406 - Inactive Management Session Timeout Commands; Login Account Commands

Chapter 85 Access Control
OLT2406 User’s Guide
619
85.5 Inactive Management Session Timeout Commands
Use these commands to configure the timeout for inactive management sessions.
85.6 Login Account Commands
Use these commands to configure login accounts on the OLT.
Table 325 Inactive Management Session Timeout Commands
COMMAND DESCRIPTION M P
show uart-logout-time
Displays the inactive management session
timeout value.
E13
uart-logout-time <time>
Sets the inactive management session timeout
value.
time: 1-60 minutes. Default value 5 minutes.
C13
no uart-logout-time
Sets the inactive management session timeout
to the default value of 5 minutes.
C13
Table 326 Login Account Commands
COMMAND DESCRIPTION M P
show logins
Displays login account information. E 3
logins username <name> password
<password> privilege <0-14>
Creates account with the specified user name
and sets the password and privilege. The
privilege level is applied the next time the user
logs in.
name: 1-32 alphanumeric characters.
password: 1-32 alphanumeric characters.
C14
logins username <name> password
cipher <password> privilege <0-14>
Creates account with the specified user name
and sets the cipher password and privilege. This
is used for password encryption. The privilege
level is applied the next time the user logs in.
name: 1-32 alphanumeric characters.
password: 32 alphanumeric characters.
C14
no logins username <name>
Removes the specified account. C 14