ZyXEL Communications OLT2406 - Overview; Tacacs; TACACS+ Commands Summary

OLT2406 User’s Guide
464
CHAPTER 60
TACACS+
60.1 Overview
Use these commands to configure external TACACS+ (Terminal Access Controller Access-Control
System Plus) servers.
60.2 TACACS+ Commands Summary
The following section lists the commands for this feature.
Table 230 TACACS+ Commands
COMMAND DESCRIPTION M P
show tacacs-accounting
Displays TACACS+ accounting server settings. E 3
tacacs-accounting host <index>
<ip>
Specifies the IP address of the specified
TACACS+ accounting server.
index: 1 or 2.
C13
tacacs-accounting host <index>
<ip> [acct-port <socket-number>]
[key <key-string>]
Specifies the IP address of the specified
TACACS+ accounting server.
Optionally, sets the port number and key of the
external TACACS+ accounting server.
index: 1 or 2.
key-string: 1-32 alphanumeric characters
C13
tacacs-accounting timeout <1-1000>
Specifies the TACACS+ accounting server
timeout value in seconds.
C13
no tacacs-accounting <index>
Disables TACACS+ accounting on the specified
server.
C13
tacacs-server host <index> <ip>
Specifies the IP address of the specified
TACACS+ server.
index: 1 or 2.
C14
tacacs-server host <index> <ip>
[auth-port <socket-number>] [key
<key-string>]
Specifies the IP address of the specified
TACACS+ server. Optionally, sets the port
number and key of the TACACS+ server.
index: 1 or 2.
key-string: 1-32 alphanumeric characters
C14