ZyXEL Communications OLT2406 - Activating Pppoe IA; Pppoe IA Access Loop Identification Settings; Pppoe IA Configuration

Chapter 102 PPPoE IA
OLT2406 User’s Guide
708
102.4 PPPoE IA Configuration
102.4.1 Activating PPPoE IA
These commands activate PPPoE IA on the OLT.
These commands activate PPPoE IA on a specific VLAN.
Note: You must activate PPPoE IA for both the OLT system and the VLAN to use PPPoE IA.
These commands enable a PPPoE-IA circuit ID or remote ID in the specified VLAN.
Note: You must activate PPPoE IA for the circuit ID or remote ID of the corresponding VLAN to
insert the given access loop identification information
102.4.2 PPPoE IA Access Loop Identification Settings
These commands assign access loop identification information for the circuit ID string and remote ID
strings for the specified VLAN on the specified port.
These commands assign access loop identification information for the circuit ID string and remote ID
strings for the specified port.
OLT2406# config
OLT2406(config)# pppoe intermediate-agent
OLT2406#config
OLT2406(config)#pppoe intermediate-agent vlan <vlan>
OLT2406#config
OLT2406(config)#pppoe intermediate-agent vlan <vlan> circuit-id
OLT2406(config)#pppoe intermediate-agent vlan <vlan> remote-id
OLT2406#config
OLT2406(config)#interface port-channel <AID>
OLT2406(config-interface)# pppoe intermediate-agent vlan <vlan> format-type
circuit-id string <string>
OLT2406(config-interface)# pppoe intermediate-agent vlan <vlan> format-type
remote-id string <string>
OLT2406#config
OLT2406(config)# interface port-channel <AID>
OLT2406(config-interface)# pppoe intermediate-agent format-type circuit-id string
<string>
OLT2406(config-interface)# pppoe intermediate-agent format-type remote-id string
<string>