ZyXEL Communications OLT2406 - Page 709

Chapter 102 PPPoE IA
OLT2406 User’s Guide
709
These commands assign an identifier-string string, option, and delimiter for the circuit ID string.
Note: The default access-node-identifier string is OLT2406.
The OLT handles PPPoE discovery-stage packets as follows:
• The OLT adds information to a PADI or PADR packet received from a non-trusted port and forwards it
to a trusted port.
• The OLT drops a PADO or PADS packet received from a non-trusted port.
• The OLT forwards a PADI or PADR packet received from a trusted port to all trusted ports.
• In other cases besides those described above, the OLT forwards PPPoE discovery-stage packets.
OLT2406#config
OLT2406(config)#pppoe intermediate-agent format-type access-node-identifier string
<string>
Table 372 Access Loop Identification Info
ACCESS LOOP IDENTIFICATION INFO DESCRIPTION
circuit-id info The circuit ID string with specified port and vlan (user
defined)
or
The circuit ID string with specified port (user defined)
or
<identifier-string>/<slot>/<port>/<vlan>
or
<access-node-identifier string> eth <slot>/
<port>:<vlan>
remote-id info The circuit ID string with specified port and vlan (user
defined)
or
The circuit ID string with specified port (user defined)
or
PPPoE Client’s MAC address