Chapter 62 Filtering
OLT2406 User’s Guide
467
CHAPTER 62
Filtering
62.1 MAC Filtering Overview ‘
This chapter discusses MAC address port filtering.
Configure the OLT to filter traffic based on the traffic’s source, destination MAC addresses and VLAN
group (ID).
62.2 MAC Filtering Commands
The following section lists the commands for this feature.
62.3 MAC Filtering Commands Examples
This example creates a MAC filter called “filter1” that drops packets coming from or going to the MAC
address 00:12:00:12:00:12 on VLAN 1.
Table 232 MAC Filtering Commands
COMMAND DESCRIPTION M P
no mac-filter mac <mac-addr> vlan
<vlan-id>
Deletes the specified MAC filter rule. C 13
mac-filter name <name> mac <mac-
addr> vlan <vlan-id> drop
<src|dst|both>
Specifies the source and or destination filter
parameters.
C13
mac-filter name <name> mac <mac-
addr> vlan <vlan-id> drop
<src|dst|both> inactive
Disables a static MAC address port filtering rule.
name: 1-32 alphanumeric characters
C13
no mac-filter mac <mac-addr> vlan
<vlan-id> inactive
Enables the specified MAC-filter rule. C 13
OLT2406(config)# mac-filter name filter1 mac 00:12:00:12:00:12 vlan 1 drop
both
To Next Page
Loading...
