ZyXEL Communications OLT2406 - Configuring OLT Management IP Address

Chapter 5 Initial Setup Example
OLT2406 User’s Guide
74
Figure 42 Initial Setup Network Example: Port VID
1 Click Advanced Applications > VLAN > VLAN Port
Setting in the navigation panel.
2 Enter 5 in the PVID field for port 10 and click Apply to
save your changes back to the run-time memory.
Settings in the run-time memory are lost when the
OLT’s power is turned off.
5.2 Configuring OLT Management IP Address
192.168.1.1 is the default in-band management IP address. You can configure another IP address in a
different subnet for management purposes. The following figure shows an example.