Chapter 29 PPPoE
OLT2406 User’s Guide
254
29.2 PPPoE Screen
Use this screen to configure the PPPoE Intermediate Agent on the OLT.
Click Advanced Application > PPPoE in the navigation panel to display the screen as shown. Click Click
Here to go to the Intermediate Agent screen.
Figure 153 Advanced Application > PPPoE Intermediate Agent
29.3 PPPoE Intermediate Agent
Use this screen to configure the OLT to give a PPPoE termination server additional subscriber information
that the server can use to identify and authenticate a PPPoE client.
Click Advanced Application > PPPoE > Intermediate Agent in the navigation panel to display the screen
as shown.
Figure 154 Advanced Application > PPPoE > Intermediate Agent
The following table describes the labels in this screen.
Table 100 Advanced Application > PPPoE > Intermediate Agent
LABEL DESCRIPTION
Active Select this option to enable the PPPoE intermediate agent globally on the OLT.
access-node-
identifier
Enter up to 20 ASCII characters to identify the PPPoE intermediate agent. Hyphens (-) and
spaces are also allowed. The default is the OLT’s host name.
To Next Page
Loading...
