Chapter 39 ONT Quick Setup
OLT2406 User’s Guide
319
CHAPTER 39
ONT Quick Setup
39.1 Overview
Use the ONT Quick Setup screens to create, modify, and delete an ONT configuration.
39.1.1 What You Can Do
• Use the ONT Quick Setup screen (Section 39.2 on page 319) to register an ONT to the OLT.
• Use the ONT Status screen (Section 39.3 on page 320) to display the ONT status.
• Use the ONT Alarm screen (Section 39.4 on page 321) to display the ONT alarms.
• Use the ONT Bandwidth Group screen (Section 39.5 on page 323) to display the ONT’s bandwidth
group settings.
• Use the Unregistered ONT screen (Section 39.6 on page 323) to display the unregistered ONTs
connected to the GPON interface.
• Use the ONT WAN screen (Section 39.7 on page 324) to display the WAN information of the ONTs.
39.2 The ONT Quick Setup Screen
Use this screen to register an ONT to the OLT. Click Advanced Application > ONT Quick Setup in the
navigation panel to display the screen as shown.
Note: For each GPON interface, there are up to 120 ONT IDs available for ONT registration
(The ONT IDs 121~128 are reserved for the ONT templates.)
Figure 193 Advanced Application > ONT Quick Setup
The following table describes the labels in this screen.
Table 142 Advanced Application > ONT Quick Setup
LABEL DESCRIPTION
Choose the GPON interface that you want the settings configured here to apply to from the
drop-down list.
ONT AID This is the identifier for the ONT connected to the selected GPON interface.
To Next Page
Loading...
