Chapter 6 Tutorials
OLT2406 User’s Guide
82
Figure 53 Tutorial: Add Tag for Frames Received on Port 2
9 Click the Save link in the upper right corner of the web configurator to save your configuration
permanently.
6.3.3 Configuring DHCPv4 Relay
Follow the steps below to enable DHCP relay on the OLT and allow the OLT to add relay agent
information (such as the VLAN ID) to DHCP requests.
1 Click IP Application > DHCP and then the Global link to open the DHCP Relay screen.
2 Select the Active check box.
3 Enter the DHCP server’s IP address (192.168.2.3 in this example) in the Remote DHCP Server 1 field.
4 Click Apply to save your changes back to the run-time memory.
To Next Page
Loading...
