ZyXEL Communications OLT2406 - Chapter 94 PON Port Status; Overview; PON Port Status; PON Port Status Commands

Chapter 94 PON Port Status
OLT2406 User’s Guide
650
CHAPTER 94
PON Port Status
94.1 Overview
This chapter introduces commands to monitor a line card’s PON port status.
94.2 PON Port Status Commands
Use these commands to display information about the PON ports.
Table 349 PON Port Commands
COMMAND DESCRIPTION M P
show interfaces olt <aid> bandwidth
Displays the specified PON port’s available
bandwidth.
aid: pon-<slot>-<pon>
E3
show interfaces olt <aid> status
Displays the status of the specified PON port.
aid: pon-<slot>-<pon>
E3
show interfaces olt <aid> counter
Displays the specified PON port’s counters.
aid: pon-<slot>-<pon>
E3
show interfaces olt <aid> rssi
Displays the specified PON port’s RSSI (received
signal strength indication) information.
aid: pon-<slot>-<pon>
E3
show interfaces olt <aid> fec
Displays the specified PON port’s FEC (Forward
Error Correction) information.
aid: pon-<slot>-<pon>
E3
show interfaces olt <aid>
trafficmanagement
Displays the specified PON port’s traffic
management information.
aid: pon-<slot>-<pon>
E3
show interfaces olt <aid>
registration
Displays the specified PON port’s registration
information.
aid: pon-<slot>-<pon>
E3
show interfaces olt <aid> unreg
Displays the specified PON port’s unregistered
ONT status.
aid: pon-<slot>-<pon>
E3
show interfaces olt <aid> ponbw-
show
Displays the specified PON port’s realtime
bandwidth allocation.
aid: pon-<slot>-<pon>
E3