ZyXEL Communications OLT2406 - Voip Dial Plan Profile Commands

Chapter 78 VoIP
OLT2406 User’s Guide
567
78.4 VoIP Dial Plan Profile Commands
The following table lists the commands for configuring VoIP dial plan profiles.
out-proxy-addr <1~63
characters>
Configures an out-band proxy IP address or URI
(from 1 to 63 characters).
C13
pri-dns <ip>
Configures the IP address of the primary DNS
server for SIP (input an IP).
C13
proxy-service-addr <1~63
characters>
Configures the IP address or URI (from 1 to 63
characters) of a proxy service.
C13
reg-exp-time <0~25200>
Configures the SIP registration expiration time
(from 0 to 25200 seconds).
C13
registrar <1~63 characters>
Configures the IP address or URI (from 1 to 63
characters) of a registrar server.
C13
rereg-head-start-time <0~720>
Configures the SIP re-registration head start time
(from 0 to 720 seconds).
C13
sec-dns <ip>
Configures the IP address of the secondary DNS
server for SIP (input an IP).
C13
softswitch <four ascii code>
Configures the SIP gateway soft switch vendor
name code (4 characters).
C13
Table 295 VoIP SIP Profile Commands (continued)
COMMAND DESCRIPTION M P
Table 296 VoIP Dial Plan Profile Commands
COMMAND DESCRIPTION M P
voip-dial-plan <name>
Creates the VoIP dial plan profile (1 to 15
character name) and enters the sub-command
mode for configuring it.
C13