Chapter 38 ONT Template
OLT2406 User’s Guide
312
38.2.5 Uniport VoIP
Use this screen to configure UNI port VoIP settings. Click Uniport VoIP in the Advanced Application > ONT
Template screen to display the screen as shown.
Figure 189 Advanced Application > ONT Template > Uniport VoIP
The following table describes the labels in this screen.
Active This displays whether the UNI port multicast channel setting is active (Y) or not (N).
UNIVID This displays the VLAN ID of the multicast channel.
Rule This displays the multicast channel settings.
Delete Select this for one or more entries and click Delete to remove them.
* Select this to select all of the entries for deletion.
Delete Click Delete to remove the entries with the Delete option selected.
Cancel Click Cancel to begin configuring the screen again.
Table 135 Advanced Application > ONT Template > Uniport Multicast
LABEL DESCRIPTION
Table 136 Advanced Application > ONT Template > Uniport VoIP
LABEL DESCRIPTION
Choose the GPON interface that you want the settings configured here to apply to from the first
drop-down list.
Choose the template that you want the settings configured here to apply to from the second
drop-down list.
Active Select this to activate the VoIP rule on the UNI port.
Uniport AID Select a UNI port on the ONT. The UNI ports are represented by the format: uniport-<pon>-<ont>-
<card>-<port>.
Vlan Select the VLAN ID for the UNI port to use for VoIP traffic.
Common
Profile
Select the VoIP common profile to have this VoIP rule apply. Click Voip-Common-Profile to view
the profile details.
To Next Page
Loading...
