Chapter 1 System Introduction
OLT2406 User’s Guide
39
Use terminal emulation software with the following settings:
1.4.4 Management Switching Card Supported Transceivers
The management switching card supports SFP+ transceivers compliant with the SFP MSA standard (SFF-
8472) and using an LC duplex receptacle. Here is the list of supported transceivers.
1.5 GPON Line Card
The GPON line card provides 4 GPON SFP slots compliant with ITU-T G.984 and supports up to 256 PON
subscribers.
Figure 7 GPON Line Card Front Panel
Table 5 Default Settings for the Console Port
SETTING DEFAULT VALUE
Terminal Emulation VT100
Baud Rate 115200 bps
Parity None
Number of Data Bits 8
Number of Stop Bits 1
Flow Control None
Table 6 Management Switching Card Supported Transceivers
SPEED MODEL DESCRIPTION
Gigabit
(With DDMI)
SFP-BXA-20DS-ZZ01V1F GbE SFP BX 20 km (21872 yd) Bidirectional Type-A 1310 ~ 1550 Tx,
DDMI version
SFP-BXB-20DS-ZZ01V1F GbE SFP BX 20 km (21872 yd) Bidirectional Type-B 1550 ~ 1310 Tx,
DDMI version
SFP-BXC-20DS-ZZ01V1F GbE SFP BX 20 km (21872 yd) Bidirectional Type-C 1310 ~ 1490 Tx,
DDMI version
SFP-BXD-20DS-ZZ01V1F GbE SFP BX 20 km (21872 yd) Bidirectional Type-D 1490 ~ 1310 Tx,
DDMI version
SFP-LX-5DS-ZZ01V1F GbE SFP LX 5 km (5468 yd) commercial type transceiver, DDMI
version
SFP-LHX-40DS-ZZ01V1F GbE SFP LHX wavelength = 1310, 40 km (43744 yd) commercial
type transceiver, DDMI version
10 Gigabit
SFP+
SFP10G-SR-ZZ0101F SFP+ 10G ER wavelength = 1550, 40 km (43744 yd) commercial
type transceiver, DDMI version
SFP10G-LR-DS-ZZ01V1F SFP+ 10G LR wavelength = 1310, 10 km (10936 yd) commercial type
transceiver, DDMI version