ZyXEL Communications OLT2406 - Setting up Login Accounts; SNMP Command Examples

Chapter 85 Access Control
OLT2406 User’s Guide
618
85.3.1 SNMP Command Examples
This example shows you how to display the SNMP information on the OLT.
This example shows you how to display all SNMP user information on the OLT.
85.4 Setting Up Login Accounts
Up to five people (one administrator and four non-administrators) may access the OLT via telnet at any
one time.
• An administrator is someone who can both view and configure OLT changes. The username for the
Administrator is always admin. The default administrator password is 1234.
Note: It is highly recommended that you change the default administrator password (1234).
• A non-administrator (username is something other than admin) is someone who can view but not
configure OLT settings.
OLT2406# show snmp-server
[General Setting]
SNMP Version : v2c
Get Community : public
Set Community : public
Trap Community : public
[ Trap Destination ]
Index Version IP Port Username
----- ------- ------------ ---- --------
1 v2c 0.0.0.0 162
2 v2c 0.0.0.0 162
3 v2c 0.0.0.0 162
4 v2c 0.0.0.0 162
OLT2406# show snmp-server user
[ User Information ]
Index Name SecurityLevel GroupName
----- ------ ------------- --------------
1 admin noauth admin