ZyXEL Communications OLT2406 - Ont Acl

Chapter 38 ONT Template
OLT2406 User’s Guide
313
38.2.6 ONT ACL
Use this screen to assign an identification number to an ACL profile, and associate the ACL profile with
an ONT template. To apply an ONT template to an ONT, go to the Advanced Application > ONT Quick
Setup screen.
Click ONT ACL in the Advanced Application > ONT Template screen to display the screen as shown.
Note: An ONT can accept up to 16 ACL profiles.
Sip-profile Select the SIP profile to apply to have this VoIP rule apply. Click Voip-Sip-Profile to view the profile
details.
Username Type 1 to 25 characters for the user name used for VoIP authentication.
Password Type 1 to 25 printable characters for the password used for VoIP authentication.
Dial-plan Select the dial plan profile to apply to this VoIP rule. Click Voip-Dial-Plan to view the profile details.
Aor Type the user identification part of the address of record (from 1 to 63 characters).
Dispname Type the customer ID (up to 25 characters) used for the display attribute in outgoing SIP
messages.
Vmail-uri Enter the IP address or URL (up to 63 characters) of the SIP voicemail server for signaling
messages.
Vmail-extimer Enter the voicemail subscription expiration time (from 0 to 3600 seconds).
Release-timer Enter the release timer (from 0 to 30 seconds).
Roh-timer Enter the time (from 0 to 30 seconds) for deciding the receiver is off hook.
Add Click Add to add a UNI port VoIP entry.
Cancel Click Cancel to clear the fields.
Clear Click Clear to return the screen’s settings to the defaults.
Index This is the index number of a UNI port VoIP rule.
AID This is the UNI port’s ID in the format: uniport-<pon>-<ont>-<card>-<port>.
Active This displays whether the VoIP rule is active (Y) or not (N).
VID This displays the VLAN ID the UNI port uses for VoIP traffic.
Rule This displays the VoIP rule settings for UNI ports.
Delete Select this for one or more entries and click Delete to remove them.
* Select this to select all of the entries for deletion.
Delete Click Delete to remove the entries with the Delete option selected.
Cancel Click Cancel to begin configuring the screen again.
Table 136 Advanced Application > ONT Template > Uniport VoIP
LABEL DESCRIPTION