EasyManua.ls Logo

ZyXEL Communications OLT2406 - Pppoe IA Per-Port Per-VLAN

ZyXEL Communications OLT2406
766 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 29 PPPoE
OLT2406 User’s Guide
258
29.3.2 PPPoE IA Per-Port Per-VLAN
Use this screen to configure PPPoE IA settings that apply to a specific VLAN on a port. See Table 101 on
page 255 for more information.
Click the VLAN link in the Intermediate Agent > Port screen to display the screen as shown.
Figure 156 Advanced Application > PPPoE > Intermediate Agent > Port > VLAN
produtname Select this and the OLT will add the product name of the ONT connected to this port to...
The OLT will get the product name of the ONT from traffic on this port.
hostname Select this and the OLT will add the host name of the ONT connected to this port to...
The OLT will get the host name of the ONT from traffic on this port.
onuid Select this and the OLT will add the identification number of the ONT connected to this port to...
The OLT will get the identification number of the ONT from traffic on this port.
uniport Select this and the OLT will add the UNI port value of the ONT connected to this port to...
The OLT will get the UNI port value of the ONT from traffic on this port.
serialnumber Select this and the OLT will add the serial number of the ONT connected to this port to...
The OLT will get the serial number of the ONT from traffic on this port.
mac Select this and the OLT will add the MAC address of the ONT connected to this port to...
The OLT will get the MAC address of the ONT from traffic on this port.
vlan Select this and the OLT will add the VLAN identification number of the ONT connected to this
port to...
The OLT will get the VLAN identification number of the ONT from traffic on this port.
Apply Click Apply to save your changes to the OLT’s run-time memory. The OLT loses these changes if
it is turned off or loses power, so use the Save link on the top navigation panel to save your
changes to the non-volatile memory when you are done configuring.
Cancel Click Cancel to begin configuring this screen afresh.
Table 102 Advanced Application > PPPoE > Intermediate Agent > Port (continued)
LABEL DESCRIPTION

Table of Contents

Related product manuals