ZyXEL Communications OLT2406 - FTP Restrictions; GUI-Based FTP Clients

Chapter 84 File Management
OLT2406 User’s Guide
609
84.3 GUI-based FTP Clients
The following table describes some of the commands that you may see in GUI-based FTP clients.
84.3.1 FTP Restrictions
FTP will not work when:
• FTP service is disabled in the service access control configuration.
• The IP addresses in the remote management configuration do not match the client IP address. If it
does not match, the OLT will disconnect the FTP session immediately.
Table 315 General Commands for GUI-based FTP Clients
COMMAND DESCRIPTION
Host Address Enters the address of the host server.
Login Type Anonymous.
This is when a user I.D. and password is automatically
supplied to the server for anonymous access.
Anonymous logins will work only if your ISP or service
administrator has enabled this option.
Normal.
The server requires a unique User ID and Password to
login.
Transfer Type Transfers files in either ASCII (plain text format) or in
binary mode. Configuration and firmware files should be
transferred in binary mode.
Initial Remote Directory Specifies the default remote directory (path).
Initial Local Directory Specifies the default local directory (path).