Chapter 36 QoS Profile
OLT2406 User’s Guide
291
The following table describes the labels in this screen.
36.3 ONT QoS Bandwidth Profile
Use this screen to configure ONT QoS upstream and downstream bandwidth profiles.
Click Bw-Profile in the Advanced Application > QoS Profile screen to display the screen as shown.
Figure 176 Advanced Application > QoS Profile > Bw-Profile
Table 123 Advanced Application > QoS Profile > Ingress Profile
LABEL DESCRIPTION
Name Specify a name for the ingress profile.
Dot1p0tc ~
Dot1p7tc
Select the traffic class values (0-7 or null) to which to map IEEE 802.1p priority tags.
Add Click Add to add an ingress profile.
Cancel Click Cancel to clear the fields.
Clear Click Clear to clear the fields.
Index This is the index number of an ONT QoS ingress profile.
Name This is the name of the profile.
Rule This displays the profile’s settings.
Delete Select this for one or more profiles and click Delete to remove them.
* Use this row to select all of the profiles for deletion.
Delete Click Delete to remove the profiles with the Delete option selected.
Cancel Click Cancel to begin configuring the screen again.
To Next Page
Loading...
