ZyXEL Communications OLT2406 - Pppoe Intermediate Agent Commands

OLT2406 User’s Guide
702
Note: The OLT will drop all PPPoE discovery packets if you enable the PPPoE intermediate
agent and there are no trusted ports.
Untrusted ports are connected to subscribers.
102.3 PPPoE Intermediate Agent Commands
Here’s the priority of settings that the OLT will use if the listed commands are all configured.
1 pppoe intermediate-agent option82 circuit-id vlan <vid> option82-info <info>
pppoe intermediate-agent option82 remote-id vlan <vid> option82-info <info>
2 interface port-channel <aid>
pppoe intermediate-agent format-type gpon-option <[format <1|2|3|4|5|6>]
[productname] [hostname] [onuid] [uniport] [mac] [vlan] [serialnumber]>
3 interface port-channel <aid>
pppoe intermediate-agent vlan <vlan-id> format-type circuitid string <string>
<cr>
pppoe intermediate-agent vlan <vlan-id> format-type remoteid string <string>
<cr>
4 interface port-channel <aid>
pppoe intermediate-agent format-type circuit-id string <string>
pppoe intermediate-agent format-type remote-id string <string>
5 pppoe intermediate-agent format-type identifier-string string <string> option
<sp|sv|pv|spv> delimiter <#|.|","|;|/|" "|>
6 pppoe intermediate-agent format-type access-node-identifier string <string>
This table describes the commands.
Table 371 PPPoE Intermediate Agent Commands
COMMAND DESCRIPTION M P
interface port-channel <aid>
Enters the sub-commands for configuring
settings for the specified port.
aid: <ge|msc|pon>-<slot>-<port>
C13
pppoe intermediate-agent trust
Sets the specified ports as PPPoE IA trusted ports. C 13
pppoe intermediate-agent
format-type circuit-id string
<string>
Configures and enables a PPPoE IA circuit ID
string for the specified port.
C13
pppoe intermediate-agent
format-type remote-id string
<string>
Configures and enables a PPPoE IA remote ID
string for the specified port.
C13