OLT2406 User’s Guide
320
39.3 The ONT Status Screen
Use this screen to view the ONT status. Click Status in the Advanced Application > ONT Quick Setup
screen to display the screen as shown.
Figure 194 Advanced Application > ONT Quick Setup > Status
The following table describes the labels in this screen.
Active Select this to have the OLT manage the ONT.
Serial Number Enter the serial number of the ONT.
Step Select this to arrange the list in numerical order according to the GPON serial numbers of the
ONTs.
Password Enter the GPON password of the ONT.
Description Enter the description for the ONT.
Template
Description
Enter the description to aid in identifying the template.
Template Select an ONT template.
Select Null to not to apply any template to the ONT.
Action Null: Select this to have the entry stay as it is.
Add: Select this to add an entry.
Modify: Select this to edit the entry.
Delete: Select this to unregister the ONT.
Apply Click Apply to save the changes.
Cancel Click Cancel to begin configuring the screen again.
Paging
Prev/Next Click Prev or Next to show the previous/next screen if all status information cannot be seen in one
screen.
Table 142 Advanced Application > ONT Quick Setup
LABEL DESCRIPTION
Table 143 Advanced Application > ONT Quick Setup > Status
LABEL DESCRIPTION
Choose the GPON interface to see the status of the ONT connected to it from the drop-down list.
ONT AID This displays the ONT’s ID in the format: ont-<pon>-<ont>.
Type Config: This displays the configurations you’ve set up for the ONT.
Actual: This displays the configurations the ONT is having.
Sn This displays the GPON serial number of the ONT.
Password This displays the GPON password of the ONT.
Status This displays the registration status of the ONT, and whether it’s active or not.
To Next Page
Loading...
