OLT2406 User’s Guide
542
76.5 IGMP CDR Commands
The following table shows the IGMP Call Detail Record (CDR) commands. CDR is used by telephone
companies for call related information.
76.6 IGMP Snooping VLAN Commands
Use the igmp-snooping vlan command to configure the IGMP snooping VLAN and the show
multicast snooping-vlan command to display the settings.
mcast-channel help
Displays the help about the multicast channel
command.
C13
Table 276 IGMP Commands on Interface Port Channel (continued)
COMMAND DESCRIPTION M P
Table 277 IGMP CDR Commands
LABEL DESCRIPTION M P
cdr igmp <cr>
Enables the IGMP CDR feature on the OLT. C 13
cdr igmp logsize <0 - 65535>
Sets the maximum number of lGMP CDR logs
allowed.
C13
cdr flush igmp
Flushes the lGMP CDR table. E 13
show cdr igmp
Displays the lGMP CDR settings. E 13
remote uniport <aid>
Configures UNI port settings.
aid: uniport-<pon>-<ont>-<card>-<port>
C13
no igmpchannel <cr> Delete the UNI port IGMP channel. C 13
igmpchannel help Displays the help about IGMP channel. C 13
show igmpchannel CDR <cr>
Displays the lGMP channel CDR settings. E 13
show igmpchannel CDR <aid>
Displays the specified uniport’s lGMP channel
CDR settings.
E13
interface port-channel <aid>
Enables a port or a list of ports for configuration.
aid: <msc|ge|pon>-<slot>-<port>
C13
igmp-immediate-leave
Enables IGMP immediate leave on the specified
port.
C13
OLT2406# show multicast snooping-vlan
IGMP Snooping VLAN mode :Auto
Index VID Name
----- ----- --------------------------------
1 100 vlan100
To Next Page
Loading...
