ZyXEL Communications OLT2406 - ONT Voip Setup Example

Chapter 78 VoIP
OLT2406 User’s Guide
579
78.9 ONT VoIP Setup Example
We use the PMG5318 as an example.
Do the following in the PMG5318’s Web Configurator screens to make sure it works for VoIP.
1 Click Maintenance > Diagnostic and ping the SIP server at 192.168.21.10.
2 Click Network > WAN and configure a WAN interface with Type set to IPoE, Service Type set to VoIP, and
Vlan ID 20.
3 Click VoIP > SIP and check the SIP server address settings.