Chapter 37 OLT Registration
OLT2406 User’s Guide
299
37.4 The ONT Summary Screen
Use this screen to display the status of all ONTs for each GPON interface. Click ONT Summary in the
Advanced Application > OLT Registration screen to display the screen as shown.
Figure 182 Advanced Application > OLT Registration > ONT Summary
The following table describes the labels in this screen.
Add Click Add to add a TCA profile.
Cancel Click Cancel to clear the fields.
Clear Click Clear to return the screen’s settings to the defaults.
AID This is the identifier for the GPON interface.
FEC
Corrected
Byte
Threshold
This displays the threshold of bytes that can be corrected by Forward Error Correction (FEC) feature.
FEC
Corrected
Code Word
Threshold
This displays the threshold of codewords that can be corrected by Forward Error Correction (FEC)
feature.
FEC
Uncorrected
Code Word
Threshold
This displays the threshold of codewords that are allowed not to be corrected by Forward Error
Correction (FEC) feature.
BIP byte
Threshold
This displays the threshold of Bit Interleaved Parity (BIP) bytes that can be received.
REI counter
Threshold
This displays the threshold of Remote Error Indication (REI) counters for BER (Bit Error Rate) reports.
Tca Active This displays whether low rate Threshold Crossing Alert (TCA) alarm is enabled or not on the ONT.
Table 128 Advanced Application > OLT Registration > Tca Configuration
LABEL DESCRIPTION
Table 129 Advanced Application > OLT Registration > ONT Summary
LABEL DESCRIPTION
PON AID This is the identifier for the GPON interface.
Unreg This shows how many unregistered ONT devices are connected to the GPON interface.
O7 This shows how many ONTs connected to the GPON interface are forbidden to transmit upstream
data.
IS This shows how many in-service ONTs are connected to the GPON interface.
OOS-LO This shows how many ONTs connected to the GPON interface have an Out Of Service status.
To Next Page
Loading...
