Chapter 67 Port Mirroring
OLT2406 User’s Guide
487
CHAPTER 67
Port Mirroring
67.1 Port Mirroring Overview
Port mirroring allows you to copy a traffic flow to a monitor port (the port you copy the traffic to) in order
that you can examine the traffic from the monitor port without interference.
Use these commands to copy a traffic flow for one or more ports to a monitor port (the port you copy
the traffic to) so that you can examine the traffic on the monitor port without interference.
Note: Use the running configuration commands to look at the current mirror settings. See
Chapter 92 on page 643.
67.2 Port Mirroring Commands
The following section lists the commands for this feature.
Table 245 Port Mirroring Commands
COMMAND DESCRIPTION M P
mirror-port
Enables port mirroring on the OLT. C 13
mirror-port <aid>
Specifies the monitor port (the port to which
traffic flow is copied) for port mirroring.
aid: <ge|msc|pon>-<slot>-<port>
C13
no mirror-port
Disables port mirroring on the OLT. C 13
show mirror
Displays mirror settings of the OLT. E 3
mirror-port vlan <vid|all>
Sets the mirrored VLAN of the monitored port.
vid: 1~4094
all: all VLANs
C13
interface port-channel <aid>
Enters config-interface mode for the specified
port(s).
aid: <msc|ge|pon>-<slot>-<port>
C13
mirror
Enables port mirroring in the interface. C 13
mirror dir
<ingress|egress|both>
Enables port mirroring for incoming (ingress),
outgoing (egress) or both incoming and
outgoing (both) traffic.
C13
no mirror
Disables port mirroring on the port(s). C 13
To Next Page
Loading...
